AirTAC HFP Series Air Gripper
Mechanical Parallel Style Pneumatic Air Gripper
The AirTAC HFP Series Air Gripper is a mechanical parallel-style pneumatic gripper designed for accurate and reliable gripping in industrial automation applications. Its lever-type gripping mechanism provides stable parallel jaw movement while maintaining a compact structure.
Available in double acting and single acting normally open configurations, the HFP Series offers multiple bore sizes and finger options for different gripping requirements. It is suitable for pick-and-place, automated assembly, component handling and general industrial automation applications.
HFP Series
Available Models
Double acting mechanical parallel-style pneumatic air gripper designed for stable and accurate gripping in industrial automation applications.
Single acting normally open mechanical parallel-style pneumatic air gripper, suitable for applications requiring the gripping jaws to return to the open position when air pressure is released.
| Series | HFP Series |
| Available Models | HFP, HFTP |
| Bore Size | 10, 16, 20, 25, 32 mm |
| Acting Type | HFP: Double acting HFTP: Single acting, normally open |
| Fluid | Air (filtered by 40μm filter element) |
| Operating Pressure – Double Acting | Ø10: 0.2–0.7 MPa (28–100 psi) Others: 0.15–0.7 MPa (22–100 psi) |
| Operating Pressure – Single Acting | Ø10: 0.35–0.7 MPa (50–100 psi) Others: 0.25–0.7 MPa (36–100 psi) |
| Proof Pressure | 1.05 MPa (150 psi) |
| Temperature Range | -20°C to 70°C |
| Lubrication | Cylinder: Not required Gripper jaws: Lubricate grease |
| Maximum Gripping Length | 30–90 mm depending on bore size |
| Maximum Frequency | 180 c.p.m. (Ø10–Ø25) 60 c.p.m. (Ø32) |
| Sensor Switches | CMSG, DMSG, EMSG, CMSH, DMSH, EMSH (depending on bore size) |
| Port Size | M3×0.5 (Ø10) M5×0.8 (Ø16–Ø32) |
Mechanical parallel-style design provides stable and reliable gripping operation.
Lever-type gripping structure provides precise parallel jaw movement while maintaining a compact design.
High gripping accuracy is achieved by minimizing the contact area between the finger and body to reduce shaking.
Sheet metal protection between the finger and body helps reduce abrasion and extend service life.
Two acting types are available: double acting and single acting normally open.
Two finger types are available: standard type and through-hole mounting type.
Multiple mounting directions provide flexible installation for different automation applications.
Magnetic switch slots allow convenient sensor installation and position detection.
Five bore sizes are available: 10, 16, 20, 25 and 32 mm.
The AirTAC HFP Series Air Gripper is suitable for industrial automation applications requiring reliable mechanical parallel gripping, accurate workpiece handling and repetitive operation.
- Pick-and-place systems
- Automated assembly equipment
- Component handling
- Parts loading and unloading
- Packaging machinery
- Electronics assembly
- Sorting systems
- Inspection equipment
- Robotic handling
- General industrial automation
The AirTAC HFP Series uses a mechanical lever-type gripping structure designed to provide reliable gripping force with accurate jaw movement.
The gripping force is approximately 20%–30% greater than the tensile force, providing strong and stable gripping performance for industrial automation applications.
Available bore sizes range from 10 mm to 32 mm, with maximum gripping lengths from 30 mm to 90 mm, depending on the selected bore size.
The HFP Series is available in double acting (HFP) and single acting normally open (HFTP) configurations, allowing users to select the appropriate model according to the required gripping operation and application.
Looking for the right product?
Our team is ready to help you select the right products for your application. Contact us today for expert advice and a fast quotation.
